Gutters are the cheapest part of a roof to ignore and one of the dearest to neglect. A failed gutter does not just drip. It soaks fascia boards, stains brickwork, and sends stormwater against foundations. In short, this guide works through what a gutter replacement cost australia homeowners pay in 2026. That covers the per-metre rate by material and three worked budgets for real houses. It also covers what downpipes and fascia add, and the point where a repair stops being worth it.
Gutter Replacement Cost Australia: The Short Answer
For the Colorbond profiles most Australian homes use, budget $45 to $95 per linear metre in 2026. That is supplied and installed, with the old gutters taken away. On a typical single-storey home, allow about 45 metres of gutter and six downpipes. Overall, the full job lands at $3,800 to $5,200. Zincalume is cheaper at $40 to $70 a metre and aluminium runs $55 to $100. Two-storey homes cost more per metre — $60 to $120. A box gutter is a different job entirely at $154 to $275 a metre.
Gutter Replacement Cost Australia by Material
Most roof plumbers price new gutters per linear metre, with downpipes listed separately. The table below reconciles several 2026 Australian guides, all including GST.
| Material and profile | Installed per metre | Typical lifespan |
|---|---|---|
| Zincalume quad | $40–$70 | 15–20 years |
| Colorbond quad or OG | $45–$85 | 20–30 years |
| Colorbond half-round or square-line | $55–$95 | 20–30 years |
| Aluminium (quad or half-round) | $55–$100 | 25–40 years |
| Copper | $130+ | 50+ years |
| Box gutter | $154–$275 | 20–30 years |
In practice, the spread inside the Colorbond band is mostly about scope and city. One 2026 guide puts Colorbond quad at $45 to $85 a metre including removal. A Melbourne roof plumber lists $93.50 a metre for a new install and $115.50 including removal. A Frankston roofer quotes $55 to $85. A national cost guide works a large job out at about $64 a metre before downpipes. Those figures look contradictory until you read what each includes. The $64 and $45 figures are for larger jobs, where the rate falls. Meanwhile, the $115.50 figure is inner-Melbourne labour with removal included. On a 45-metre job, the difference between $64 and $85 a metre is about $945. That is why three comparable quotes matter.
How Much the Material Choice Matters
In fact, material choice is a smaller decision than most people expect. Zincalume is the same steel as Colorbond without the paint finish, so it costs less and lasts a little less. It lasts 15 to 20 years against 20 to 30, and it is a poor choice near the coast. Colorbond Ultra, the coastal grade, runs $70 to $100 a metre and is worth it near the beach. Aluminium costs more than steel but never rusts. It suits coastal and high-rainfall homes, and lasts 25 to 40 years. For most suburban homes the sensible comparison is Colorbond quad against half-round. The half-round profile carries more water and suits high-rainfall areas. For example, it runs $55 to $95 a metre against $45 to $85 for quad.
Worked Budgets: Three Real Jobs
Per-metre rates only help once you multiply them out. These three budgets use published 2026 line items.
Job 1 — single-storey, 45 metres, Colorbond quad, six downpipes. In other words, this is the standard job. For example, a national cost guide prices it at $3,800 to $5,200 including GST. The line items are removal and disposal, $630. Then 45 metres of Colorbond quad gutter, $2,500. Six downpipes at about $198 each come to $1,188. As a result, the total is $4,318, inside the band. If your quote lands well above $5,200 for this scope, ask what is different. It could be fascia work, a steep roof, or difficult access.
Job 2 — small single-storey home, Frankston and Mornington Peninsula. A local 2026 guide puts a full Colorbond replacement at $1,500 to $4,000. Downpipes start from about $180 each. For example, the low end is a small home with short runs and sound fascia. The high end is a larger home or one needing fascia repairs.
Job 3 — double-storey home. Double-storey work costs $60 to $120 a metre, against $35 to $65 for single-storey work. As a result, the gap comes from the access equipment and extra labour. Elevated work platforms or scaffold hire adds $500 to $1,500. A 50-metre double-storey run at $90 a metre is $4,500 before downpipes and access. That is why double-storey quotes surprise people.

Gutter, Downpipe and Fascia: The Combined Budget
However, a gutter quote is rarely just gutters. Plumbers usually price downpipes per unit. One Melbourne plumber charges about $198 each, and Frankston prices start from about $180 each. Six downpipes therefore add roughly $1,100 to $1,200 to a standard job. Check them first on any quote, since a cheap per-metre price can hide expensive downpipes, or too few of them. The National Construction Code sets the rule: a downpipe must not serve more than 12 metres of gutter. On a 45-metre run that means at least four downpipes. In practice, five or six is normal once corners and valleys are counted.
Fascia is the board the gutter hangs from. It is the most common surprise in a gutter job. Gutters hide fascia damage for years. A roofer who removes the old gutter can find rot underneath, particularly on the north and west faces. Roofers quote fascia replacement per metre once they see the damage. The figure varies too much by extent and access for a single national number. Overall, what matters is that it appears as its own line on the quote, not buried in the per-metre rate. Ask for the fascia to be inspected and photographed before the new gutter goes on. Once the new gutter is up, the fascia is hidden again for another twenty years.
Gutter Guard: Worth It or Not
Gutter guard is the other common add-on, at about $49.50 a metre installed. It keeps leaves out and cuts cleaning, but fine debris still gets through. Guard over a gutter that already sags or holds water is money spent on the wrong problem. Fix the fall and the brackets first. If the gutters are being replaced as part of a bigger exterior refresh, our roof painting cost guide prices the job most homeowners pair with it. The house renovation cost per square metre guide puts the gutter line in whole-house budget context.
Gutter Replacement Cost Australia by State
Labour is the main reason the gutter replacement cost australia figures differ between cities. A 2026 state-by-state guide puts installed per-metre rates at $45 to $115 in New South Wales and $45 to $110 in Victoria. Queensland is $40 to $105 and Western Australia is $45 to $110. South Australia and Tasmania are $40 to $100, and the ACT is $45 to $110. In short, all figures are GST inclusive.
Similarly, city totals tell the same story in dollars. For a standard single-storey house with 50 metres of Colorbond quad gutter and four downpipes, one 2026 guide puts Sydney at $3,400 to $6,200. Melbourne is $3,200 to $5,900. Sydney is dearer on labour rates, parking and steep blocks, while Melbourne is kept down by competition. Brisbane, Perth and Adelaide sit at or below the Melbourne band on most guides. The per-metre rate is only half the quote; the other half is how many metres your roof has. Measure the runs yourself before the quotes arrive.

Repair or Replace?
Not every tired gutter needs replacing — the test is the condition of the steel, not its age. Repair wins when the problem is local. That means a leaking joint, one rusted section, a loose bracket, or a detached downpipe. Those are per-job repairs quoted on inspection, and they make sense while the rest of the run is sound. Replacement wins when the problems run along the gutter rather than sitting in one spot. For instance, that means rust showing through in several places, pinholes that weep after rain, or a gutter that sags between brackets. You can treat surface rust and paint over it. Rust through the steel is beyond repair, because the metal is gone.
Age is the tiebreaker. A Colorbond gutter at 25 years with rust in three places will not get better. Yearly repairs cost more than a replacement within a few seasons. The other tiebreaker is the fascia. If it is rotten, the gutter has to come off to fix it anyway. Putting a twenty-year-old gutter back on new fascia is false economy. When a gutter replacement cost australia quote comes in for a full run, weigh it against two or three years of patch repairs. Also weigh the damage a failed gutter does to the fascia and walls behind it.
What to Check in a Quote
A good gutter quote has six lines. First, the metreage and the profile. Second, removal and disposal of the old gutters. Third, the downpipes, counted by unit, with their positions. Fourth, the fascia — inspected, and any replacement as its own line. Fifth, the fall and the overflow. Gutters must fall to the downpipes, and the National Construction Code’s rules set the sizing. That includes the 12-metre maximum per downpipe and AS/NZS 3500.3 for larger gutters. The Code’s Part 3.5.3 on gutters and downpipes is the reference your roof plumber works to. Sixth, the warranty — workmanship and product, in writing.
Three more checks before you sign. The installer should be a licensed roof plumber, not a general handyman. Guttering is plumbing work, and the licence is what the warranty rests on. The price should state whether GST is included. Every figure in this guide includes it. A quote that does not say is usually the one that adds it later. If the job is part of a larger renovation, price it alongside the rest of the work. Our kitchen renovation cost guide shows how the trades overlap. A gutter job booked while access is already up for another trade costs less than the same job booked alone.
Frequently Asked Questions
How much does gutter replacement cost per metre in Australia?
For Colorbond steel supplied and installed, roughly $45 to $95 per linear metre is a realistic 2026 figure at single-storey height, including removal of the old gutters. Zincalume runs $40 to $70 a metre, aluminium $55 to $100, and copper from about $130. Double-storey work runs $60 to $120 a metre.
How much does it cost to replace gutters on a whole house?
A typical single-storey home with about 45 metres of gutter and six downpipes costs $3,800 to $5,200 in 2026 with Colorbond quad gutter, including removal and disposal. A small single-storey home can be $1,500 to $4,000; a double-storey home usually lands higher overall. Fascia repairs, if needed, are extra.
How much do downpipes cost to replace?
Downpipes are usually priced per unit at about $180 to $198 each installed, so six downpipes add roughly $1,100 to $1,200 to a job. The National Construction Code requires that no downpipe serve more than 12 metres of gutter, so a 45-metre run needs at least four, and five or six is normal.
When should gutters be repaired instead of replaced?
Repair when the problem is local — a leaking joint, one rusted section, a loose bracket, or a detached downpipe — and the rest of the run is sound. Replace when rust shows through in several places, pinholes weep after rain, the gutter sags between brackets, or the steel is past 20 to 25 years with rust in more than one spot. If the fascia is rotten, the gutter comes off anyway.
How long do Colorbond gutters last?
Colorbond gutters typically last 20 to 30 years, against 15 to 20 years for Zincalume and 25 to 40 years for aluminium. Lifespan depends on climate, maintenance and proximity to the coast — salt air shortens the life of unpainted steel. Regular cleaning and prompt repair of small rust spots get a gutter to the top of its range.
Price the job by the metre, then check the lines around it. Downpipes counted, fascia inspected, removal included, and the fall right. A gutter at $64 a metre with all of that in the quote is cheaper. The $45-a-metre one leaves the extras out.
