Garage Door Cost Australia: 2026 Guide

The garage door cost Australia homeowners pay in 2026 runs from about $900 for a basic single roller door. It rises to $6,000 or more for an insulated double sectional door with a timber-look finish, supplied and installed. The type of door matters more than the brand, and the motor matters more than most people expect. Adding automation to a manual door adds $600 to $1,200. Buying the door direct and paying an installer for labour alone can come in under a single supply-and-install quote. Ultimately, the trick is comparing the same job, not the same headline.

Garage Door Cost Australia: The Short Answer

Specifically, a single manual roller door costs $900 to $1,800 installed, and a double roller door $1,400 to $2,600. A single sectional door in steel runs $1,500 to $2,800, and a double sectional $2,200 to $4,500. Insulated or timber-look sectional doors run $2,200 to $3,800 single and $3,200 to $6,000 double, while custom timber, aluminium slat or glass doors start at $3,500 single and $5,000 double, and can pass $12,000. In other words, those are Yakka Labour’s 2026 bands, and they line up with the other published guides once you match manual against automatic and supply-only against installed. Meanwhile, a tilt door, the old up-and-over panel, sits in the middle at $1,800 to $3,500 single and $3,000 to $5,000 double.

Garage Door Cost Australia by Type and Size

First, size, then type. For example, a single door covers an opening about 2.4 metres wide, while a double covers about 4.8 metres. The table below uses Yakka Labour’s 2026 installed bands, with Wholesale Garage Doors’ delivered prices alongside so you can see what the door alone costs.

Door typeSingle, installedDouble, installedDoor only, delivered
Roller door, Colorbond steel, manual$900–$1,800$1,400–$2,600From $893; $1,011 for 2.4 m
Sectional door, steel, standard$1,500–$2,800$2,200–$4,500$1,483 for 2.4 m; $2,735 for 4.8 m
Sectional, insulated or timber-look$2,200–$3,800$3,200–$6,000—
Tilt / up-and-over door$1,800–$3,500$3,000–$5,000—
Custom timber, aluminium slat or glass$3,500–$7,000$5,000–$12,000+—

In fact, the bands are wide because the finish moves the price as much as the mechanism. For instance, a plain Colorbond roller door is the cheapest way to close a garage, and it suits investment properties, sheds and coastal wind zones — a wind-locked coastal specification adds $500 to $1,500. A sectional door costs more because it runs on tracks, seals better against weather and dust, and takes insulation and window inserts.

Builtly’s 2026 guide puts the same idea in starker terms. An automated single roller door installed costs $1,800 to $3,000, and an automated double roller $3,000 to $5,000. A double sectional costs $4,000 to $10,000 or more at premium specification. Sydney installers publish lower bands. Ballard Garage Doors in Sydney lists single roller installation from $880 to $1,480 and double sectional from $1,780 to $3,105. That shows how much local labour and the door’s specification move the total.

Roller garage door with a corrugated steel curtain on an Australian brick home

Worked Budgets: Three Garages, Three Doors

Three common jobs, priced end to end, using the 2026 guides checked on 20 November 2026.

Budget 1: Single roller door, manual to automatic — $1,500 to $1,800

In practice, buy the door direct and pay an installer for labour. Wholesale Garage Doors lists a single roller door for a 2.1 by 2.4 metre opening at $1,010.90 delivered. An opener bought with the door costs $299, and local installer labour runs $200 to $400. That is a typical total of $1,510 to $1,710. Bought as a single supply-and-install job from a dealer, the same automatic single roller door typically runs $1,250 to $3,675, with most jobs landing around $2,300. The direct route is cheaper when the opening is standard and the installer is local, while the dealer route is simpler when the opening needs work.

Budget 2: Double sectional door, insulated, automatic — $3,200 to $6,000

Overall, the most common upgrade on a modern home. Yakka Labour prices an insulated or timber-look double sectional door at $3,200 to $6,000 installed, including the motor. A standard steel double sectional without insulation runs $2,200 to $4,500, and the motor alone adds $700 to $1,200. The insulation matters if the garage sits under a bedroom or beside a living room. A bare steel door turns the garage into an oven in summer and a fridge in winter. The insulated panel with a proper perimeter seal is what fixes it. Allow a day for the install, and check the headroom: a sectional door needs 200 to 300 millimetres above the opening for the tracks.

Budget 3: Custom timber-look double door — $5,000 to $12,000+

Finally, custom timber, aluminium slat or glass doors start at $5,000 for a double and pass $12,000 for architectural specifications. The price is in the material and the making: real timber needs sealing and maintenance, aluminium slats give the timber look without the upkeep, and glass panels need the right framing to meet wind ratings. A custom colour or premium finish on a standard door adds $300 to $700, which is the cheap way to get most of the look. Perth pricing sits at the top of the national range. Slide & Glide’s 2026 Perth list starts at $3,000 plus GST for a single roller door. A single sectional starts at $3,500 plus GST. Both prices are supplied and installed, with a motor, remotes and removal of the old door.

Garage Door Cost Australia: What a Motor Really Costs

Automation is a separate purchase, and it is where quotes diverge most. A roller door motor costs $600 to $1,000 installed, and a sectional door motor $700 to $1,200, with more for heavy doors. Fitting a motor to a door you already have usually runs $420 to $1,050, and converting a manual door in Perth costs about $600 to $1,100 with the motor and fitting included. The motor itself is the cheap part — an Auto Openers motor is $349 on its own, or $299 bought with a door — and the fitting, the safety beam and the remotes are the rest.

However, two safety points matter more than the price. First, the Australian standard for garage doors is AS/NZS 4505:2012, which covers design, construction and installation, including wind pressure ratings. Second, the opener standard AS/NZS 60335.2.95:2024 governs the electrical safety of automatic operators, including the closing-force limit and the infrared beam protection that stops the door on an obstruction. A cheap opener without those protections is not a bargain. The standard’s catalogue record is held by ANSI’s webstore, which lists Standards Australia as the content provider.

Garage Door Cost Australia by City

Labour and local manufacturing move the price. Yakka Labour’s 2026 city table for installed doors shows the pattern.

CityDouble roller, installedDouble sectional, installedLocal factors
Sydney$1,600–$2,700$2,500–$4,800Higher labour rates, tight access
Melbourne$1,500–$2,600$2,300–$4,500Competitive market; insulated doors popular
Brisbane$1,500–$2,600$2,300–$4,500Storm and wind exposure in some areas
Perth$1,400–$2,500$2,200–$4,300Strong local manufacturing; coastal corrosion

Perth list prices look dearer than the table because Perth installers publish from-prices that include the motor, remotes and old-door removal, while the table prices the door and standard install. In short, the lesson is the same as with every trade: compare itemised quotes, not headlines. A roller door is usually quicker to fit than a sectional, so a sectional sits at the higher end of the labour range, and regional jobs often come in under metro rates.

Garage door motor and opener rail mounted on a garage ceiling

What Installation Includes — and What It Does Not

A full garage door installation usually includes removal of the existing door, new tracks and hardware, the opener and its setup, safety checks and labour. Most standard installs take about four to five hours.

What it usually does not include is electrical work if there is no power point near the opener. Extra remotes and keypads, a battery back-up, and any structural work the opening needs are also excluded. A sagging lintel or an out-of-square opening is discovered on the day, not in the quote. Most supply-and-install prices include removing and disposing of the old door if it is a straight swap. If the garage floor is the next job, our epoxy garage floor cost guide prices that at $50 to $165 per square metre installed, and if the garage itself is changing use, the garage conversion cost guide covers the approval and the build. For the door hardware itself, our roller shutter types guide explains how roller mechanisms differ across doors and shutters.

Repair or Replace? When a New Door Is Not the Answer

In particular, a door that is noisy, slow or stuck is often a $150 to $550 repair, not a $3,000 replacement. Most service calls cost $150 to $300, and replacing broken springs on a sectional door usually costs $250 to $550. Replace the door when the curtain is rusted through, the panels are bent, the tracks are worn beyond adjustment, or the door predates the current safety standards and has no auto-reverse. A door that is fine but manual is a motor job at $600 to $1,200, not a new door. And if the door is sound but the garage is cold, check the seal and the insulation before the door — a $200 perimeter seal can do more than a $2,000 panel upgrade.

Frequently Asked Questions

How much does a garage door cost in Australia?

A new garage door costs about $900 to $6,000 supplied and installed in Australia in 2026. A basic single roller door sits at the bottom of that range and an insulated double sectional door with a timber-look finish at the top. Custom timber, aluminium slat or glass doors start at $3,500 single and $5,000 double, and can pass $12,000.

How much does a double garage door cost?

A double roller door costs $1,400 to $2,600 installed, and a double sectional door $2,200 to $4,500. An insulated or timber-look double sectional runs $3,200 to $6,000, and an automated double roller door $3,000 to $5,000. A double sectional at premium specification can reach $10,000 or more.

How much does it cost to automate a garage door?

A roller door motor costs $600 to $1,000 installed, and a sectional door motor $700 to $1,200. Fitting a motor to an existing door usually runs $420 to $1,050, and converting a manual door costs about $600 to $1,100 with the motor and fitting included. The motor itself can cost as little as $299 bought with a door.

Is a roller door or a sectional door cheaper?

A roller door is cheaper. A single manual roller door costs $900 to $1,800 installed against $1,500 to $2,800 for a single sectional door in steel. Roller doors suit budgets, investment properties and coastal wind zones, while sectional doors seal better, take insulation and window inserts, and suit modern frontages and new builds.

What is included in a garage door installation?

A full installation usually includes removal of the existing door, new tracks and hardware, the opener and its setup, safety checks and labour, and takes about four to five hours. It usually does not include electrical work if there is no power point, extra remotes, a battery back-up, or structural work the opening needs.

Measure the opening, price the door and the motor separately, and check the safety standard before the price. The right garage door is the one that fits the opening, the street and the way you use the garage every day.

Leave a Comment