Plantation Shutters Cost Australia: 2026 Guide

The plantation shutters cost Australia homeowners pay in 2026 starts at about $300 for a small single-panel window. By contrast, a wide multi-panel opening costs $800 to $1,500 and more, installed. In fact, the number that matters is not the window count. In fact, it is the panel count and the square metres. Installed rates run roughly $300 to $600 per square metre in PVC and $400 to $800 in timber. A whole house of eight average windows costs about $4,100 to $5,600 in PVC. However, the published ranges disagree by a factor of five. The reason is arithmetic, not the market. Most guides quote a different unit, and the per-window figure hides the size of the window behind it.

Plantation Shutters Cost Australia: The Short Answer

For example, supplied and installed in 2026, expect roughly $387 per square metre for PVC. Overall, basswood is $487 and external aluminium is $657, on RenoPlace’s national figures. Per medium window of about 1.5 square metres, that is $580 in PVC. Basswood is $730 and aluminium is $985. Sydney guides put PVC at $250 to $400 per square metre. Basswood is $350 to $550 and solid timber is $500 to $700 or more. Adelaide supplier Stan Bond lists PVC at $350 to $550 and basswood at $450 to $650. Western red cedar is $650 to $950 per square metre installed. Overall, the honest range for PVC across the published guides is $300 to $600 per square metre. For timber it is $400 to $800. Any quote inside those bands is plausible, while one far outside them deserves a second quote.

Plantation Shutters Cost Australia per Square Metre by Material

In practice, material is the second-biggest lever on price after panel count. It moves the square-metre rate by roughly a third. The table below reconciles the main 2026 guides, all checked on 20 November 2026.

MaterialPer m² installedPer medium window (~1.5 m²)Best for
PVC / polymer$300–$600$450–$700Wet areas, budget, humid climates
Basswood (timber)$410–$650$600–$950Mainstream residential, paintable
Solid timber / cedar$500–$950$900–$1,400Premium homes, large windows
Aluminium (external)$350–$750$985Outdoor areas, wide openings

For instance, PVC is waterproof, does not warp and suits bathrooms, kitchens and humid climates. However, it has a slightly thicker profile than timber, and some products can yellow in strong sun. ABS polymer at $380 to $520 per square metre is the UV-stable alternative. Basswood is a lightweight hardwood, paintable and the most popular mainstream choice. It can span wider panels than PVC because it is lighter. Solid timber and western red cedar sit at the top of the range. Their natural grain suits premium homes and large windows. Aluminium is the strongest panel for wide openings and the standard choice outdoors, where timber would not survive. Installation labour runs $70 to $150 an hour when suppliers charge it separately. Most quotes bundle it into the per-square-metre rate.

Timber plantation shutters with a natural wood finish on bedroom windows

Worked Budgets: One Room, a Whole House, and a Premium Home

Three jobs at three scales, using the reconciled 2026 rates. Each budget assumes standard rectangular windows and a professional measure and install.

Budget 1: One room, three windows in PVC — $1,350 to $2,100

Three standard windows of about 1.2 by 1.2 metres give 1.44 square metres each. That is 4.3 square metres in total, at $300 to $450 per square metre in PVC, plus the measure and install. Sydney guides put a standard PVC window at $450 to $700 each. As a result, that lands the same job at $1,350 to $2,100. As a result, small jobs carry the highest per-square-metre rate. Fewer square metres share the measure, the manufacturing setup and the installer’s travel. If you are only doing one room, expect the top of the PVC band, not the bottom.

Budget 2: Whole house, eight windows in PVC or basswood — $4,100 to $7,100

Eight average windows of about 1.5 square metres each give 12 square metres in total. They cost $4,100 to $5,600 in PVC, or $5,200 to $7,100 in basswood, on RenoPlace’s 2026 figures. In short, the per-square-metre rate falls as the project grows. Melbourne supplier IMEKO prices PVC at $299 per square metre for small jobs under four windows. Medium jobs of five to fifteen windows are $279, and whole-home jobs of 25 windows or more are $239. Similarly, basswood follows the same pattern at $329, $309 and $269. The saving is real but modest — about 20 per cent from the smallest to the largest tier. It is worth doing the whole house in one visit if the budget allows, but not worth stretching for.

Budget 3: Whole home, 51 square metres and more — $12,200 to $19,750

For a large home with 25 windows or more, IMEKO’s whole-home tier prices PVC at $12,200 to $15,000. Basswood is $13,350 to $16,200 and aluminium is $16,780 to $19,750. For example, that includes supply, freight, professional installation, the on-site measure and perimeter caulking. Overall, at this scale the material choice is worth $4,000 to $5,000 across the whole job. That is why the decision should be made room by room. Use PVC in the bathrooms and kitchen and basswood in the living areas and bedrooms. Aluminium belongs only where the shutters face the weather. Corner windows, bay windows, arched openings and sliding or bi-fold door systems all need individual quotes. They use different hardware from a standard flat panel.

Plantation Shutters Cost Australia: Why Quotes Differ So Much

In summary, three things explain the five-fold spread in published plantation shutter prices. First, the unit. A per-panel price runs $250 to $450 for PVC and $600 to $900 or more for timber. That is not comparable with a per-window price. A wide window splits into two, three or four panels. Second, the size. A small single-panel opening costs about $300, while a wide multi-panel opening costs $800 to $1,500 and up. The guides that quote per window rarely state the window size. Third, the scope. The square-metre rate is the only unit that scales honestly. That is why this guide prices everything per square metre first.

In other words, a quote that only gives a per-window figure tells you nothing on its own. In other words, it has no panel count and no square metres. Ask for the breakdown. If the windows are part of a bigger refresh, our window replacement cost guide prices new windows with the frames included. The shutters comeback guide covers the style side. It shows where plantation shutters suit a room and where they fight it.

DIY vs Professional Installation

In practice, makers build plantation shutters to measure. That means there is no true DIY supply-only market in the way there is for blinds. The realistic DIY option is measuring and fitting a ready-made shutter from a home improvement store. It suits a standard rectangular window and saves the install labour of $70 to $150 an hour. The risk is the measure. A shutter that is 5 millimetres out does not fit. You cannot trim a made-to-measure panel on site the way you can trim a blind.

Professional installation includes the measure, the manufacturing to that measure, and the fitting. It also includes perimeter caulking so there are no light gaps around the finished frame. For hinged, sliding and bi-fold panels, professional measure and install is the safer spend. Similarly, the same applies to any window that is not a plain rectangle. One more check: shutters are a furnishing, not building work. No licensing regime applies to the installation. The quality control is the supplier’s warranty and the reviews, not a licence number.

Close view of white plantation shutter louvres half open with sunlight on a timber floor

Plantation Shutters Cost Australia vs Blinds: What the Money Buys

Roller blinds run about $157 per square metre, or $235 per medium window. PVC shutters are $387 per square metre. Shutters cost roughly two and a half times as much. The extra money buys a fixed fitting that stays with the house. It buys louvres you can angle for light and privacy without losing the view. It also buys a finish that reads as joinery rather than a window dressing. It also buys longevity. A well-made shutter lasts decades, while a blind needs replacing every few years.

The case for blinds is the price and the flexibility. They suit rentals, rooms where the look changes often, and windows where a fixed panel would block access. Our roller shutter types guide covers the external side, including security and storm shutters. Shutters also earn their keep as shading. The Australian Government’s Your Home shading guide recommends adjustable shading, including louvres and shutters, for east and west windows. Low-angle summer sun is hardest to block there. In short, shading the glass is the best way to cut unwanted heat gain.

Frequently Asked Questions

How much do plantation shutters cost per square metre in Australia?

Supplied and installed in 2026, plantation shutters run $300 to $600 per square metre in PVC, $410 to $650 in basswood, $500 to $950 in solid timber or cedar, and $350 to $750 in aluminium. National average figures are about $387 per square metre for PVC, $487 for basswood and $657 for external aluminium. The rate falls as the project grows.

How much does it cost to put plantation shutters on a whole house?

Fitting PVC plantation shutters to eight average windows costs about $4,100 to $5,600 in 2026, or roughly $580 a window. Basswood costs $5,200 to $7,100 for the same eight windows. A large whole-home job of 51 square metres or more runs $12,200 to $15,000 in PVC, $13,350 to $16,200 in basswood, and $16,780 to $19,750 in aluminium.

Are PVC or timber plantation shutters better?

PVC is better for wet areas, kitchens, bathrooms and humid climates because it is waterproof and does not warp, and it is the cheapest option. Timber, usually basswood, is lighter so it spans wider panels, it can be painted or stained, and it suits premium homes. Solid timber and cedar cost the most and need more care. Choose by the room, not by the whole house.

Can I install plantation shutters myself?

You can fit ready-made shutters on a standard rectangular window yourself and save the install labour of $70 to $150 an hour. Made-to-measure shutters need a professional measure, because a panel 5 millimetres out does not fit and cannot be trimmed on site. Hinged, sliding and bi-fold panels, and any window that is not a plain rectangle, should be professionally measured and installed.

Do plantation shutters add value to a home?

They are a fixed fitting that stays with the house, and buyers generally value them over blinds — they read as joinery, last decades, and give light control and privacy without losing the view. They cost about two and a half times as much as roller blinds, so the value case is strongest when they suit the style of the home and the whole house is done in one visit.

Price shutters by the square metre and the panel count, choose the material room by room, and get the measure done by the people making the panels. The dearest shutter is the one measured wrong.