A built in wardrobe cost australia homeowners pay in 2026 depends on one choice more than any other. That choice is flatpack or made to measure. A flatpack robe for a 2-metre wall costs $1,150 to $1,800 before assembly. A custom robe for the same wall costs $3,200 to $4,300 installed. Both are built-in wardrobes in the everyday sense. They sit flush against the wall and stay with the house. One is furniture you assemble and the other is joinery built to your room. The rest of this guide works through the prices by size and finish. Overall, it covers the per-metre rates, a worked budget for a 2.4-metre robe, and city costs.
Built In Wardrobe Cost Australia by Size and Finish
For example, a single built-in robe runs from about $1,000 at the budget end to $6,000 or more at the premium end. In fact, most mid-range jobs land between $3,000 and $5,000. Hipages puts it the same way in its 2026 guide. Basic is from $1,000, medium is $3,000 to $5,000, and premium is $6,000 and up. The table below uses Renoplace’s November 2026 prices. They are the most detailed Australian figures available, for a standard 2.4-metre-wide robe at 2.4 metres high.
| Robe | Price |
|---|---|
| Basic 1.8 m, melamine, sliding doors | $1,400–$1,900 |
| Mid-range 2.4 m, sliding doors | $3,200–$4,300 (likely $3,600) |
| Mirrored 2.4 m, sliding doors | $3,500–$4,800 |
| Whole house, three 2 m robes, basic | $5,500–$7,400 |
| Premium custom robe, 2-pac finish | $6,000+ |
In practice, size drives the price more than anything else. Joiners price a robe by the metre of wall it covers. Doors are the second driver. For instance, mirrored sliding doors add about 10% to the price. Hinged doors in a 2-pac finish add about 25%. A small robe in a small room is the one place where the flatpack wins on value. Our small bedroom design ideas show how to make a compact robe work harder without spending more.
Per-Metre Rates: The Number Your Quote Is Built On
Joiners quote built-in wardrobes per linear metre, so the per-metre rate is the number to compare between quotes. Renoplace’s November 2026 per-metre figures for a standard-height robe are the most granular published. In short, they show how much the door choice matters.
| Door type | Basic | Mid-range | Premium |
|---|---|---|---|
| Sliding | $900/m | $1,500/m | $2,600/m |
| Mirrored sliding | $990/m | $1,650/m | $2,850/m |
| Hinged, 2-pac finish | $1,150/m | $1,900/m | $3,250/m |
| Open (no doors) | $680/m | $1,150/m | $1,950/m |
Similarly, other 2026 guides land in the same territory. Omega Kitchens, writing in November 2026, puts simple robes at $1,000 to $1,500 a metre. In addition, mid-range is $1,500 to $2,200, and premium is $2,500 to $3,500 and up. Airtasker lists $1,110 to $3,010 or more per linear metre. Karven’s range is $1,110 to $3,300. The low end of every guide is a basic melamine carcass with sliding doors. The high end is 2-pac, mirrored, or fully custom joinery. If a quote comes in below $1,000 a metre, check what is missing. Usually it is the doors, the installation, or both.

Why a Flatpack Costs $1,150 and a Custom Robe $3,600
The gap looks like a markup until you price the flatpack honestly. CompareFlatpacks, using October 2026 prices including delivery, puts a 2-metre built-in flatpack robe at $1,150 for IKEA PAX. Fantastic Furniture’s Garde range is $1,300, and Bunnings’ Lugna is $1,800. The PAX figure breaks down as frames $460, sliding doors $320, drawers $165, shelves and rails $150, and delivery $74. That is a total of $1,169. IKEA charges $202 to assemble a PAX built-in robe. The honest flatpack total is about $1,371 with assembly, and that is before you fit it to the wall.
However, a custom robe at $3,600 for the same 2.4-metre wall is not the same product with a bigger margin. Your joiner measures it to your room, builds it to fit an uneven wall or a sloping ceiling, and installs it. Karven’s worked example for a 3-metre mid-range robe shows where the money goes. The carcass is $3,200, sliding doors and tracks are $1,400, and installation labour is $1,200. That is a total of about $5,800, or roughly $1,930 a linear metre. In practice, carpenters charge $55 to $130 an hour. A robe scribed to a wonky wall takes longer than one that slots into a square opening. The custom robe also carries a joiner’s warranty and a finish that a flatpack cannot match. That finish is 2-pac, timber veneer, or mirrored doors.
Built In Wardrobe Cost Australia: Flatpack or Custom — Which Wins Where
The flatpack wins when the wall is standard, the room is square, and you are happy with melamine and standard sizes. In short, that means a rental, a first home, or a spare bedroom. The custom robe wins when the wall is not standard. That is when the robe has to fill an alcove exactly, or when you want mirrored or 2-pac doors. IKEA’s own PAX system, the most common flatpack choice, comes in frames 50, 75 or 100 centimetres wide. It also comes 201 or 236 centimetres high, and 35 or 58 centimetres deep. If your wall falls between those sizes, you are leaving a gap or paying a joiner to fill it. The IKEA PAX wardrobe system page lists the current combinations and prices. That includes a PAX/GRIMO combination at $1,012.50 on a 10% discount running to 30 November 2026.
Worked Budget: A 2.4-Metre Robe, Two Ways
Flatpack way. A 2-metre PAX robe at $1,150, plus $202 for IKEA assembly and $74 delivery, comes to $1,426. That is for a 2-metre robe, not 2.4 metres, so a wider wall needs a second frame or a filler panel. Add drawers and extra shelving and the figure climbs toward $1,600. You also need to fix the robe to the wall and add filler strips yourself, or pay a handyman.
Custom way. For instance, a 2.4-metre sliding-door robe in mid-range melamine is $3,200 to $4,300. The most likely figure is $3,600, and that includes installation. Karven’s 3-metre example at about $5,800 shows the same structure at a larger size. It lists carcass, doors and tracks, and labour as three separate lines. Overall, the difference between the two ways is about $2,200 on a 2.4-metre robe. It buys a robe built to the millimetre, doors that run true, and a warranty. For a main bedroom robe you will use every day for ten years, that is the better spend. For a spare room, the flatpack wins.
Built In Wardrobe Cost Australia by City
In fact, labour is the main reason the built in wardrobe cost australia figures differ between cities. Renoplace’s November 2026 city figures for a 2.4-metre mid-range sliding-door robe, likely price, are Sydney $4,100 and Darwin $4,000. Canberra is $3,900 and Melbourne is $3,800. Brisbane is $3,600, Perth is $3,600, and Adelaide is $3,400. Overall, Sydney is dearest on labour rates, parking and access. Adelaide is cheapest on the same measures. The spread between Sydney and Adelaide is $700 on the same robe — about 20%. That is why a quote from another city is not a useful comparison. Get three quotes from joiners in your suburb. Each one should state the metreage, the door type and whether it includes installation.

Walk-In Wardrobes: One Section, Not a Separate Guide
A walk-in wardrobe is a different job from a built-in robe, and it has its own cost guide on this site. In brief: a walk-in fit-out — shelving, rails and drawers for an existing walk-in room — runs $5,000 to $7,000 a room. For example, Renoplace puts a 6-metre run of mid-range walk-in shelving with LED lighting at $6,200 to $8,500. By contrast, a full walk-in room, built from scratch with cabinetry, runs $20,000 to $30,000. Snap Wardrobes in Sydney lists walk-ins from $1,690 to $17,000 and up depending on size and finish. If your room has the space, a walk-in is worth pricing alongside a built-in robe. The per-metre figures in this guide are for built-in robes.
Doors, Drawers and the Extras That Move the Price
In practice, doors are the single biggest lever on the price after size. Mirrored sliding doors add about 10%; hinged doors in a 2-pac finish add about 25%. Sliding doors alone, supplied without the robe, run $250 to $650 a door in Sydney. The door choice is also a design choice. Sliding doors suit tight bedrooms where a hinged door would hit the bed. For example, our wardrobe doors guide compares sliding, hinged and bi-fold doors in detail. In practice, drawers, soft-close runners, LED lighting and extra shelving each add a few hundred dollars. They are worth specifying on the quote rather than discovering on the invoice. The standard robe depth is 600 millimetres — deep enough for a coat hanger with room to spare. A shallower robe is a false saving.
For the room around the robe, our master bedroom ideas show how a built-in robe sits in a finished bedroom. Similarly, mirrored doors make a small room feel larger, and timber finishes warm up a white room.
Getting a Quote You Can Compare
Overall, a good wardrobe quote has four lines: the carcass, the doors and tracks, the installation labour, and the delivery. Ask for each one separately. Check whether the price includes GST — every figure in this guide includes it. Measure the wall yourself before the joiner arrives. Note the width, height and depth, and anything unusual, like a sloping ceiling or a wall that is not square. A quote that does not state the metreage cannot be compared with one that does. A quote that excludes installation is not comparable with one that includes it.
In practice, a custom quote normally includes installation. Renoplace’s $3,200 to $4,300 for a 2.4-metre robe is an installed figure. Karven’s worked example lists installation labour at $1,200 as part of the $5,800 total. Flatpack prices usually do not include it. IKEA’s PAX price is the furniture alone, and assembly is $202 extra. In short, three comparable quotes, each with the same specification, will tell you more than any guide figure can.
Frequently Asked Questions
How much does a built-in wardrobe cost in Australia?
A mid-range built-in wardrobe for a 2.4-metre wall costs $3,200 to $4,300 installed, with $3,600 the most likely figure. A basic 1.8-metre robe is $1,400 to $1,900, and a premium custom robe is $6,000 or more. A flatpack robe for a 2-metre wall is $1,150 to $1,800 before assembly.
Is a flatpack wardrobe cheaper than a custom one?
Yes, by about $2,200 on a 2.4-metre robe: a PAX flatpack with assembly and delivery is about $1,426, against $3,600 for a custom robe. The custom robe is measured to your room, built to fit uneven walls, and carries a joiner’s warranty. The flatpack wins for a standard wall and a spare room; the custom robe wins for a main bedroom.
What is the per-metre cost of a built-in wardrobe?
Per-metre rates in 2026 run $900 to $2,600 for sliding-door robes, $990 to $2,850 for mirrored sliding doors, and $1,150 to $3,250 for hinged doors in a 2-pac finish. The low end is basic melamine; the high end is premium joinery. Open robes with no doors run $680 to $1,950 a metre.
Does the price include installation?
A custom quote normally includes installation: Renoplace’s $3,200 to $4,300 for a 2.4-metre robe is an installed figure, and Karven’s worked example lists installation labour at $1,200 as part of the $5,800 total. Flatpack prices usually do not include it — IKEA’s PAX price is the furniture alone, and assembly is $202 extra.
How much does a walk-in wardrobe cost?
A walk-in fit-out for an existing room runs $5,000 to $7,000, and a 6-metre run of mid-range walk-in shelving with LED lighting is $6,200 to $8,500. A full walk-in room built from scratch runs $20,000 to $30,000. Walk-ins are priced per room, not per metre.
A built in wardrobe cost australia quote should be priced by the metre. Then check it line by line: carcass, doors, installation and delivery, each stated separately. A flatpack at $1,150 is the cheapest robe you can buy. A custom robe at $3,600 is the cheapest robe you will never have to think about again. Pick the one that matches the room, and get three quotes on the same specification before you decide.
