Replacing the eaves on a house in Australia costs $40 to $120 per lineal metre in 2026. Eaves on a house Australia quotes spread wide because one quote says $3,000, another says $9,000, and both describe the same roof edge. In short, the difference is what the quote includes: lining only, fascia only, gutters, painting, access gear, or asbestos handling.
Eaves on a House Australia in 2026: The Short Answer
For a single-storey home with 50 to 60 metres of eaves, budget $3,000 to $7,000 for lining and fascia in 2026. If you replace the gutters too or the home is two storeys, budget $6,000 to $12,000. Eave lining alone runs $40 to $90 per lineal metre. Also, timber fascia runs $40 to $120 depending on the state. Steel fascia runs $35 to $75. Painting adds $15 to $35 per lineal metre.
What Eaves Are: Fascia, Soffit and Gutter
An eave is the part of the roof that projects past the outside wall. The fascia is the vertical board fixed to the rafter ends at the roof edge. The gutter hangs off it. Also, the soffit, or eave lining, is the flat underside.
The eave does three jobs. First, it throws rainwater clear of the walls and windows. Second, it shades glass from high summer sun while letting low winter sun in. Third, it closes the roof space off from birds and wind-blown rain.
How Wide Should Eaves Be?
For example, a 300 mm eave is what volume housing delivered: largely cosmetic, with little summer shading on glazing. A 450 mm eave is the practical minimum for useful work. In fact, many master-planned estate guidelines now require it as the minimum. Choose a 600 mm to 900 mm eave where the budget allows.
Size an eave as a ratio: a projection of around 45 per cent of the window head height above the sill blocks high summer sun while admitting low winter sun. On a single-storey north wall, a 600 mm eave shades 82 per cent of a window at noon in late February in Sydney, and 100 per cent in Brisbane. Meanwhile, winter sun still reaches the glass in June. On a west wall it is a different story. In Sydney in January, it shades only the top 0.43 metres of the wall at 4 pm. So, the window below sits in full sun. Instead, west-facing glass needs vertical screens, shutters or planting, not a wider eave.
Eaves overhang 450 mm to 600 mm on every side. A house with 180 square metres under roof often has 210 to 230 square metres of roofing once you count eaves and pitch.
Open Eaves vs Closed Eaves
Open eaves show the rafter ends and the underside of the roof covering, with no lining. In contrast, closed eaves, also called boxed eaves, have a flat soffit lining that hides the rafters.
| Open eaves | Closed eaves | |
|---|---|---|
| Look | Exposed rafters, traditional | Flat lined soffit, clean modern line |
| Ventilation | Roof space breathes freely | Needs vents or perforated lining |
| Bushfire | Harder to seal against embers | Easier to seal; lining is the barrier |
On a bushfire-prone block the closed eave wins, because the lining is what stops embers getting into the roof space. However, on a Queenslander the open eave is part of the character, at the cost of more painting.

Eave Materials Compared: Timber, Fibre Cement, Colorbond and Aluminium
Four materials cover nearly every eave. Timber is the traditional fascia material: dressed pine boards, primed on all faces and painted after. It looks warm but rots when water sits behind a leaking gutter. Fibre cement is the modern default for linings: James Hardie Hardie Flex sheets come in 450 mm, 600 mm and 750 mm widths at 4.5 mm thick. Also, they resist rot, termites and fire, and take paint well. Also, Colorbond steel is the fascia and gutter material, including fascia-integrated systems. Aluminium is the coastal option. It costs more than steel, but aluminium gutters last 25 to 40 years against 20 to 30 for Colorbond.
| Material | Used for | Supply-only price, 2026 |
|---|---|---|
| Timber (dressed pine) | Fascia, rafter ends | In the $40–$120/m installed fascia rate |
| Fibre cement (Hardie Flex) | Eave lining, soffit | $18.20–$27.70 per 2.4 m sheet |
| Colorbond steel | Fascia, gutters | In the $35–$95/m installed gutter rate |
| Aluminium | Fascia, gutters, trims | Gutters $55–$100/m installed |
Sheet prices are supply only, from Sydney retailers checked November 2026. A 450 mm by 2400 mm Hardie Flex sheet costs $18.20, 600 mm $20.40 and 750 mm $27.70. Also, a full pack of sixty 600 mm sheets lists at $990 including GST, or $16.50 a sheet.
What Eave Replacement Costs per Lineal Metre
The eaves on a house Australia prices below come from three 2026 Australian guides. Their numbers differ by state, inclusions and storeys.
Eave lining: The Quote Yard’s Victorian guide puts replacement at $40 to $90 per metre. Reno Perth prices by the square metre. It puts fibre cement lining installed at $45 to $70 per square metre for standard BoardSmart 4.5 mm. Also, grooved Easylap runs $60 to $85, and perforated vented sheeting $65 to $85. The two agree once you convert: a 600 mm lining is 0.6 square metres per lineal metre. The Perth rate is roughly $27 to $42 per lineal metre before trims and paint. Perth prices per area; Victoria bundles the finish.
Fascia: Victoria and Queensland agree closely. The Quote Yard puts timber fascia replacement at $50 to $120 per lineal metre in both states, including removal, replacement, priming and painting. Yakka Labour’s national guide puts timber fascia at $40 to $90 per metre to replace and paint. Steel fascia runs $35 to $75 per metre. In contrast, Western Australia is cheaper on repair: $40 to $80 per metre. The spread is not a mistake. The $120 top end is a rotted fascia on a two-storey home with full repaint. By contrast, the $35 bottom end is a sound fascia swapped on a single-storey home with easy access. Where two quotes differ by more than 20 per cent, the gap is almost always the fascia allowance. In fact, it is rarely the gutter.
Gutter and Downpipe Costs
Gutters are always quoted with the eaves. Standard quad Colorbond runs $35 to $55 per metre installed in Victoria and $45 to $90 in Queensland. Meanwhile, Western Australia runs $50 to $110, and the national rate is $45 to $95. Also, half-round runs $55 to $95 nationally and $80 to $130 in WA. Also, downpipes run $80 to $250 each in Queensland and $120 to $280 each in WA. Overall, WA is dearest, Victoria cheapest on quad, Queensland in the middle.
| Item | Victoria | Queensland | Western Australia | National |
|---|---|---|---|---|
| Eave lining, per lineal metre | $40–$90 | — | $45–$70/m² installed | — |
| Timber fascia, per lineal metre | $50–$120 | $50–$120 | $40–$80 (repair) | $40–$90 |
| Colorbond quad gutter, per lineal metre | $35–$55 | $45–$90 | $50–$110 | $45–$95 |
Painting the eave line is its own line. In fact, repainting while the gutter is off is the cheapest time to do it. Finally, eaves and fascia painting costs $15 to $35 per linear metre.
Ventilation: Why Eaves Need Air
A closed eave seals the roof space. Without air, condensation stains the lining from the inside. Fit vented lining: perforated sheeting or round soffit vents, which let the roof space breathe. In contrast, perforated vented sheeting runs $65 to $85 per square metre installed in Perth, against $45 to $70 for standard sheeting.

Bushfire: Eaves and the BAL Rules
Under Australian Standard AS 3959, once a site rates BAL-12.5 or higher, seal the roof and wall junction. No opening may be greater than 2 mm. Fit ember guards to eaves ventilation openings greater than 3 mm. Use non-combustible material, or a mesh or perforated sheet with a maximum aperture of 2 mm. Make them from corrosion-resistant steel, bronze or aluminium. In practice, use 4.5 mm fibre-cement lining, metal fascia or barge at 450 mm centres, or bushfire-resisting timber. Screen every vent to 2 mm. At BAL-29 and in the Flame Zone, enclose or screen the eaves to prevent ember entry. The Shire of Denmark BAL-12.5 to BAL-29 construction guide sets out the requirements.
Pre-1990 homes carry a second warning. Homes built before about 1990 may have asbestos cement eave linings. Also, asbestos removal adds $35 to $60 per square metre in Perth, done by a licensed operator after testing. Above all, never cut or pressure-wash a suspect lining: test first.
Eaves on a House Australia: 3 Worked Budgets
Three budgets for a typical single-storey home with 55 metres of eaves.
Budget 1 — reline the eaves only, single storey: $2,200–$4,950. Eave lining replacement at $40 to $90 per lineal metre over 55 metres is $2,200 to $4,950. Painting adds $825 to $1,925 if not included. Confirm whether paint is in the metre rate.
Budget 2 — fascia plus gutters, single storey: $6,000–$11,500. The arithmetic: 55 metres of quad gutter at $45 to $95 per metre ($2,475 to $5,225), 55 metres of timber fascia at $40 to $120 per metre ($2,200 to $6,600), and 5 downpipes at $80 to $250 each ($400 to $1,250). That totals $5,075 to $13,075 before rounding. So, the guides’ $6,000 to $11,500 band sits inside that range.
Budget 3 — two-storey, fascia, gutters and scaffold: $8,000–$14,500. Take Budget 2 at the top of its band and add edge protection or scaffolding at $1,200 to $3,500. For example, a two-storey standard home runs $5,500 to $11,000 for gutters alone. A two-storey quote under $6,000 all in is missing something: the scaffold, the fascia allowance, or the disposal.
How to Read an Eaves Quote
A comparable eaves quote names the same things: metres, lining material and width, fascia material, gutter profile and grade, downpipe count and size, and whether painting, disposal and scaffold are in the price or separate. Comparing eaves on a house Australia figures without those seven lines is guesswork, so get three quotes for the same specification and be suspicious of any quote far below the others. Also watch for extras: asbestos testing, disposal, and garden repairs after scaffold. Finally, check the warranty in writing, including whether the lining, fascia and paint carry the same term. Our roof painting cost guide prices the paint half of the job. Also, our pergola cost guide covers the other roof edge shading a backyard. Our metal wall cladding guide details the eave-to-wall junction.
Frequently Asked Questions
What are eaves on a house?
Eaves are the parts of a roof that overhang the outside walls: the fascia board along the edge, the soffit or eave lining underneath, the gutter, and the rafter ends. Eaves throw rainwater clear of the walls, shade glass from high summer sun, and close the roof space off from birds and wind-blown rain.
How much does it cost to replace eaves on a house in Australia?
Eave lining replacement costs $40 to $90 per lineal metre in 2026, timber fascia costs $40 to $120 per lineal metre depending on the state, and steel fascia costs $35 to $75 per metre. A typical single-storey home with 50 to 60 metres of eaves costs $3,000 to $7,000, and $6,000 to $12,000 if gutters are replaced too or the home is two storeys.
How wide should eaves be in Australia?
A 450 mm eave is the practical minimum that does useful shading work, and 600 mm to 900 mm is preferred where the design and budget allow. The correct size is about 45 per cent of the window head height above the sill. A 600 mm eave shades 82 per cent of a standard north-facing window at noon in late February in Sydney and 100 per cent in Brisbane.
What is the difference between open eaves and closed eaves?
Open eaves show the rafter ends and the underside of the roof with no lining, so the roof space breathes freely but embers, birds and possums can enter. Closed eaves have a flat soffit lining that hides the rafters, but they need vents or perforated lining so the roof space can breathe. Closed eaves are easier to seal for bushfire protection.
Do eaves need ventilation?
Yes, if they are closed. A sealed roof space needs air, or warm moist air condenses on the underside of the roof and stains the lining from the inside. Perforated sheeting or round soffit vents let the roof breathe: perforated sheeting runs $65 to $85 per square metre installed against $45 to $70 for standard sheeting. In bushfire zones, vents larger than 3 mm need ember guards with a maximum aperture of 2 mm.
Can eaves be replaced on a house with asbestos lining?
Yes, but only after testing and only by a licensed operator. Homes built before about 1990 may have asbestos cement eave linings, and asbestos removal adds $35 to $60 per square metre. Never cut or pressure-wash a suspect lining. Test first, then price the job.
In short, measure the metres and get the fascia allowance in writing before anyone climbs a ladder. The eaves on a house Australia price that holds up lists lining, fascia, gutters, paint and access as separate lines. Size the overhang to the window and check the BAL rating first.
