The front door cost Australia homeowners actually pay starts at about $600 for a basic like-for-like swap. A custom pivot entrance can pass $6,000. The gap between those two numbers is the whole story. Most published 2026 guides agree on the range. They disagree on what sits inside it, because one quote prices a door and the next prices a whole entrance. This guide reconciles the two. It gives the door-by-door rates from four live Australian sources and one worked budget for a standard replacement. It also names the line items that decide your quote’s place in the range: hardware, sealing, finishing and structural work.
Front Door Cost Australia: The Short Answer
For a standard single front door supplied and installed into an existing opening, expect $600 to $2,500 in 2026. Custom pivot doors sit higher again at $3,000 to $6,000 or more. In fact, the state guides agree on the bands. The Quote Yard’s Queensland guide lists solid timber at $1,200 to $3,000 and pivot doors at $2,500 to $6,000. For example, aluminium-framed glass sits at $1,500 to $3,500. Its New South Wales guide puts a like-for-like replacement at $600 to $1,800 and a standard new door at $800 to $2,500.
| Door type | Supplied and installed (2026) | Best for |
|---|---|---|
| Solid-core hinged, paint-grade | $600–$1,200 | Budget refresh, like-for-like swap |
| Solid timber panel door | $1,500–$3,500 | Character homes, durability, street appeal |
| Timber and glass combination | $1,800–$4,000 | Light with privacy |
| Door with sidelights or highlight | $2,500–$4,500 | A wider, brighter entry |
| Aluminium-framed glass | $1,500–$3,500 | Contemporary homes, light entry |
| Custom pivot door | $3,000–$6,000+ | Architectural frontages, grand entries |
| Fibreglass or composite | $1,000–$2,500 | Low maintenance, coastal homes |
| Heritage restoration | $800–$2,500 | Queenslanders and Federation homes |
Melbourne specialist pricing sits at the top of those bands, and honestly so. Meanwhile, Doors Replaced is a Melbourne door supplier and installer. It lists its StormBloc engineered door from $2,399 supplied and installed and architectural timber from $2,999. In contrast, entrance transformations start from $5,445, and pivot and oversized doors from $6,270. The difference is scope, not honesty. In short, the national guides describe the common job. The specialist prices a finished, made-to-measure entrance with its own frame system.

Front Door Cost Australia: The Worked Budget
Ranges only become a budget when the line items are named. For example, Karven’s 2026 worked example covers a Melbourne suburb job. It swaps a tired hollow door for a solid timber panel door, a new frame, quality hardware and a full paint finish. The job uses the existing opening. The total comes to about $2,350 including GST.
| Line item | Estimate |
|---|---|
| Solid timber slab | $950 |
| New frame and jamb, plus seals | $350 |
| Lock, handle and hinges (mid-range set) | $220 |
| Painting and finishing (two coats) | $380 |
| Hanging and fitting labour | $450 |
| Total (inc GST) | About $2,350 |
Two things stand out. First, the slab itself is less than half the job. Frame, hardware, paint and labour together cost more than the door. The labour figure lines up with the trade guides. hipages puts a standard door installation at $100 to $300 for the fitting alone. Doors Plus puts professional installation of a standard front door at $200 to $600.
The Cheap Swap vs the Entrance Transformation
Two very different jobs share the name “front door replacement”. That is the single biggest source of confusion in front door pricing. A like-for-like swap keeps the frame, the opening and the hardware positions, and only the slab changes. The Quote Yard puts that job at $600 to $1,800 in New South Wales and $800 to $2,000 in Queensland. A standard new door with its own frame and hardware is the next step up at $800 to $2,500. An entrance transformation is a different project altogether. It means a new frame, sidelights or highlight windows, often a wider or taller opening, new hardware throughout and a full finish. Doors Replaced prices that work from $5,445 in Melbourne, and pivot doors from $6,270.
In other words, neither price is wrong; they describe different scopes. The mistake is comparing a $900 swap quote with a $5,445 transformation quote. One of them does not have to be a rip-off. Sort quotes into three piles before comparing them. First is the swap: slab only, existing frame. Second is the replacement: door plus frame and hardware. Third is the transformation: opening changes, sidelights, pivot or oversized. For example, a swap is the right call when the frame is sound, square and weathertight. A transformation is the right call when the entry itself is the problem. It may be too dark, too narrow, or out of proportion with the facade. No slab, however good, fixes a bad opening.
Material Choice: Timber, Aluminium or Composite
Similarly, material choice moves the number almost as much as scope. Solid timber is the Australian default for character and street appeal. But it must be sealed on all six faces and recoated on schedule. Otherwise it moves and weathers. Aluminium-framed glass suits contemporary homes at $1,500 to $3,500. Fibreglass and composite doors at $1,000 to $2,500 are the low-maintenance option.
Hardware, Security and Energy: What the Quote Should Include
A front door quote that names only the slab is incomplete. The front door cost Australia guides publish all hide the same three gaps. Hardware is the first. The Quote Yard puts hardware and locks at $150 to $600 on top of the door. Doors Replaced itemises the pieces. A Zanda Zenith lever set with deadbolt costs $121 including GST. Hinges run $16.50 each, or $49.50 for a standard three-hinge set. Ask for the hardware brand and model in writing.
Security is the second gap, and it is mostly about the frame, not the lock. A good deadbolt in a soft or split jamb is no security at all. A proper installation reinforces the strike plate with long screws into the stud. It hangs the door so it closes without pushing or lifting. Homes in bushfire-prone areas may need a door and frame that meet a Bushfire Attack Level rating. Raise it with the supplier before ordering. Apartments have their own rule. A fire-rated doorset is a compliance item, not a style choice. The Quote Yard puts it at $1,500 to $4,000.
Energy is the third gap, and the cheapest comfort upgrade in the whole job.
Energy: Sealing Is the Cheapest Comfort Upgrade
A front door that leaks air around its edges wastes heating and cooling all year. The fix is unglamorous: proper weatherseals, a threshold seal and a frame that is packed and sealed square. The Australian Government’s Your Home case study covers a two-storey family home in Northcote, Victoria. It shows the same principle at work on a whole house: airtight construction and multipoint-locking windows. The front door is where that sealing either holds or fails. Our window replacement cost guide covers the same sealing and glazing logic for the rest of the facade. The entryway design ideas guide shows how the space inside the door should work once the door itself is sorted.

Front Door Cost Australia: When the Opening Changes
The fastest way for a front door job to double in price is to change the opening. Widening or raising an opening is structural work. So is cutting a new one, or adding sidelights where there was solid wall. The job needs a new lintel, engineering, a building permit and re-rendering or re-cladding around the new frame. Forming or altering an opening costs $1,000 to $3,000 of structural work, says The Quote Yard. That is on top of the door itself. It comes before the make-good of plaster, architraves, render and paint on both sides.
Three other conditions push the budget the same way. A heritage overlay or character precinct can require timber joinery and a like-for-like profile. That rules out the cheapest aluminium options and adds approval time. A home built before 1990 may have asbestos sheeting or putty near the reveals. That needs a licensed removalist before the frame comes out. A second-storey entry adds access cost that a ground-floor swap never sees. The same goes for one that needs scaffolding for the finish work. Get the site inspected before the quote is written. Then these items appear as named lines instead of variations halfway through.
Finishing deserves the same warning. A new timber door needs sealing on all six faces and two finish coats. The $380 in the worked budget covers that. Our house painting cost guide puts a single room at $400 to $1,200 professionally painted. That is a useful check on any finishing line.
How to Read a Front Door Quote
A comparable quote has seven lines. First, the door itself: material, size, brand and model. Second, the frame, new or existing. Third, hardware named by brand. Fourth, glazing type and whether it is safety glass where required. Fifth, seals named rather than implied. Sixth, finishing, primer and coats. Seventh, removal and disposal of the old door and frame, with make-good of the reveals and architraves. As a result, any quote missing one of these is not comparable with one that has them all.
Get three quotes, all for the same scope. In practice, compare them line by line rather than by the bottom number. A quote that is $400 cheaper because it excludes disposal, finishing and seals is not cheaper — it is incomplete. Ask each supplier the same three questions in writing. What is excluded? What is a provisional sum? And what hardware is included?
Frequently Asked Questions
How much does a front door cost in Australia?
A standard single front door supplied and installed into an existing opening costs $600 to $2,500 in 2026. A solid-core hinged door runs $600 to $1,200, a solid timber panel door $1,500 to $3,500, and a custom pivot door $3,000 to $6,000 or more. A full entrance transformation with sidelights and structural work starts from about $5,445 in Melbourne.
What does a standard front door replacement include?
A proper replacement includes the door slab, a new frame and jamb with seals, mid-range hardware such as a lever set, deadbolt and hinges, two coats of paint or finish, hanging and fitting labour, and removal of the old door. Karven’s worked example for that scope totals about $2,350 including GST, with the slab at $950 and labour at $450.
Is it cheaper to replace just the door slab?
Yes, when the frame is sound. A like-for-like swap into an existing frame costs $600 to $1,800 in New South Wales and $800 to $2,000 in Queensland, against $800 to $2,500 for a standard new door with its own frame. Replace the frame too when it is out of square, rotten, or letting in draughts that new seals cannot fix.
How much extra is a pivot door or sidelights?
A custom pivot door runs $3,000 to $6,000 or more supplied and installed, and a door with sidelights or a highlight window runs $2,500 to $4,500. Both often need opening changes, which add $1,000 to $3,000 of structural work, and pivot doors in Melbourne are listed from $6,270 including the frame system.
Do I need council approval to replace a front door?
A like-for-like replacement in the same opening usually does not need approval. Approval is more likely when you widen or raise the opening, change the facade in a heritage overlay, or need a fire-rated doorset in an apartment. Check the overlay on your title or the council planning portal before ordering.
Sort your quotes into swap, replacement or transformation before comparing them. Check that hardware, seals and finishing are named lines. And get the opening measured before anyone writes a price. Overall, the door is the cheapest part of the decision; the scope around it is where the money goes.
